Coloured wool felts are available in the following strengths and densities:

* 1 mm (0.25-0.28 g/cm³)
* 2, 3 and 5 mm (0.28 g/cm³)
* 3  and 5 mm (0.30 g/cm³)

Our technical felt selections (industrial felts) offers felts in several densities and thicknesses. Available colours are natural white, grey mélange and black. The wool percentage varies amongst technical felts. Please note, that industrial felt selection’s colours are not strictly defined, as it always depends on colour shades used in the fibre mixture.  Therefore the shades of grey vary greatly between different production lots. Industrial felts have also less strict standards for aesthetic appearance, which shows especially in white shades. There can be more vegetable residues and other impurities in the felt. As clean surface as in designer felts can be guaranteed only in special cases.

Just like wall papers, felts have small differences in shades between product lots. If the ordered amount requires strict colour unity, remember to mention it.

Wool is a natural material and therefore vegetable residues get mixed with wool during sheep’s life. Different treatments will remove these residues, but there might still be a piece of grain or grass left in the end product. But this goes with the territory, so no need to worry.

 

Colored felts selections

The available thicknesses for each colour are given in the picture name. Colour information appears when you move your mouse over the image. You will get a bigger image by clicking it.

S-Collection

  • Thicknesses: 2, 3 or 5 mm (all colours are available in 3mm)
  • Density: 0.28 g/cm³
  • 100% wool
  • Light moisture repellent surface treatment
  • Ökö-tex 100 Certificate
  • Fire-safety class B2 as floor material

Check the prices.

Natural S-Collection

  • Also in Wool White
  • Thicknesses: 2, 3 or 5 mm (all colours are available in 3 mm)
  • Density: 0.28 g/cm³
  • 100% wool
  • Light moisture repellent treatment
  • Shade S110 and S190 natural wool fibre colour (no dyes)
  • Ökö-tex 100 Certificate
  • Fire-safety class B2 as floor material

Natural colour selection’s felts show more or less natural residues, which gives these felts more character. The Rough white (S110) and Truffel Brown (S250) shades hold the biggest amount of natural residues and secondly the natural grey mélange. The Rough White (S110) also has some small pink, blue or green spots, sheep marking colours. The Wool White (S100) has the least of any residues.

Check prices

R-Collection

  • Thin felts: natural white, black, natural grey 1 mm
  • Double felt:
    • Natural brown – natural light  5 mm
      • roll width 1,45 m
      • limited availability – check the stocks
      • Density 0,30 g/cm³
    • Double felt:
      •  2 Greys (Dark grey – light grey) – 3  and 5 mm
      • 3 mm: roll width 1,82 m
      • 5 mm: roll width 1,45 m
      • limited availability – check the stocks
      • Density 0,30 g/cm³
    • Sandwich felt:
      • Light grey – red – dark grey 5 mm
      • Orange – brown 5 mm
      • roll width 1,45 m
      • limited availability – check the stocks
    • Exit items:
      • lime & coralle: 3 mm  (roll width approx. 1,8 m)
      • skin tone:70% viscose 30 % wool
    • Density: 0,30 g/cm³
    • 100 % wool
    • Ökö-tex 100 -certificate
    • Fire safety: FMVSS 302 or DIN4102 (part 1)
    • Wide range of other colours available by orders – minimum order approximately 10 m/color

Check prices

Industrial wool felt collections 1 mm

  • Natural white, black, natural grey
  • roll widths 1,75-1,85 m
  • wool percentage ~80-90 %
  • density 0,28 g/cm³

Colours: Natural  white (carbonated) refracts to cream shades and can have more residues on its surface than the Wool White S100. Also the lightness of the white can vary between production lots.

Colours: Natural grey mélange (mottled) has often also more residues than color S170 which in general is the closest color to this technical felt option. Mélange colour have always colour variation in different product lots.

Colours:Black 1 mm (density can also be 0,25 g/cm³) – the “deepness” of black can vary between production lots.

 

Background information

Estimation of felts’ suitability for sewing can be found in this PDF chart.

Read the price information and care instructions.

Explore also these special felt qualities of the KH Felts selections

  • Sandwich felt 5 mm / 0,30 g/cm³ – layered felt with different colours, two color combinations
  • Double felt 5 mm / 0,30 g/cm³ – two-layer felt in two colour combinations

Ask us about availability!

Above: Sandwich 5 mm orange-brown
Below: Double-layer 5 mm – natural white – brown